Welcome to Ask for Help

Home RV Happy Hour Forums Ask for Help Welcome to Ask for Help

Tagged: , ,

This topic contains 36 replies, has 14 voices, and was last updated by Profile photo of Trip and Lisa Trip and Lisa 3 weeks, 4 days ago.

Viewing 7 posts - 31 through 37 (of 37 total)
  • Author
    Posts
  • #10568
    Profile photo of Eddie & Aileen
    Eddie & Aileen
    Participant
    • Oshoto,Wyoming USA
    Cheers: 5 728

    Hi Sharon, I don’t know about Jayco but we have had to revamp most in our Keystone. The plastic guide supports at the back crack were the screws hold it to the wall ect. After replacing them several times I made a “Mod” on the guides. I took wood 1×2 furring strips and run them from the floor to the most upper guide rail and positions to the back of the guides near the plastic support in the rear. Make sure the 1×2 bottom is on the floor and put a screw in the last side hole in the upper most guide. Then do the same on all of the guides on both guides on each side of your drawers.

    Hope this helps, it did the trick for us now on 3-years now.

    Happy Trails!!!

    #10570
    Profile photo of
    Anonymous
    Cheers: 0

    Our Jayco has full extension metal drawer slides, but I do notice the bottoms seem a bit loose in the grooves. No problems so far, will probably glue the bottoms to prevent future issues. No problems so far!

    #10577
    Profile photo of Sharon
    Sharon
    Participant
    • Nebraska
    Cheers: 51

    The part that breaks is the plastic support that is attached to the wall that holds the metal slide that the rollers go in.  They seem to split on the underside of the plastic and then eventually the drawer drops.

    #10589
    Profile photo of
    Anonymous
    Cheers: 0

    I just pulled out a drawer, mine seems to have metal supports at the rear. Mine is a 2012 28 BHS.  Are you referring to something else as there doesn’t seem to be any plastic in the mechanism apart from the glide portion that holds the little ball bearings.

    #10594
    Profile photo of Sharon
    Sharon
    Participant
    • Nebraska
    Cheers: 51

    Your back brackets are Metal   The ones we have are plastic.. Wonder where to buy the ones like you have.  We don’t have ball bearings so your slides must be different than ours.  Thanks for showing me that there are metal brackets available some where

    #10595
    Profile photo of
    Anonymous
    Cheers: 0

    Lee Valley Tools has an extensive selection of drawer slides and hardware, probably if you in a sample, they could match you up with something of better quality.

    #14768
    Profile photo of Trip and Lisa
    Trip and Lisa
    Participant
    • Devils Lake ND
    Cheers: 47

    Hey Ray,Disregard my most recent email,I figured it out,LOL.

    Been a long busy summer,Lost my 11 year old weiner dog CC this summer to diebetes 6 weeks ago.Never thought I’d miss her this much dang it.We still have Cooper a weinie mix and Bucky,our 11 year old Choc Lab and I don’t even want to say how many cats we have.

    Been traveling all over this summer and supposed to go up towards Kalispell next week but since I have COPD,I may put that trip off a few weeks because of the forest fires out that way.Anyone out that way let me know what the smoke is like will ya please?.

    Gonna send Ray a few mods we have been doing on the 5er this summer.Try to do that this fall.

    Hope all you folks are having a great summer and hope to see some of you this winter for sure.

Viewing 7 posts - 31 through 37 (of 37 total)

You must be logged in to reply to this topic.